LapLiftSign in

How to export your data from a Garmin Catalyst

The Garmin Catalyst keeps your laps on the device and has no export button in its menus. It does have a hidden log export that writes your whole history to the SD card. LapLift reads those files, so you can compare laps, see the delta trace and sync video from sessions you have already driven.

Create your free account

What you need

  • The Catalyst on its powered mount (in the car, or on a bench supply)
  • A microSD card in the device with a few gigabytes free
  • A computer with a card reader

Export the logs on the Catalyst

  1. Put the Catalyst on its mount and power it on. Wait for the Home screen.
  2. Press and hold the Settings cog for about 15 seconds, then let go.
  3. A "Collect logs" screen appears. Tap YES.
  4. Wait for the SUCCESS screen. With a few seasons of sessions this can take many minutes, so keep the device powered.
  5. Turn the Catalyst off and take out the SD card.

Garmin does not document this export. The steps above are the ones published by VBO Converter, and they match what we see on an original Catalyst. We have not tested a Catalyst 2 yet. If yours behaves differently, tell us and we will update this page.

Copy the files to your computer

Put the SD card in your computer and look in the Garmin folder for files whose names start with SupportLogs. There is one file for roughly every gigabyte of history: SupportLogs.tar.gz.gpg.aa, then .ab, .ac and so on. Copy all of them into one folder. The export is a single archive cut into pieces, so every piece is needed.

Open your sessions in LapLift

  1. In LapLift, click Upload Session.
  2. Select every SupportLogs file together (or drop them all in at once).
  3. LapLift reads the export on your own computer and lists every session in it: track, date, car, best lap and lap count.
  4. Tick the sessions you want and click Add. Pulling a session out takes ten to twenty seconds.
  5. Click Upload. Each session then opens in the analysis page like any other logger file.

The export itself never leaves your computer. It holds your whole history and is often more than a gigabyte, so LapLift unpacks it in the browser and uploads only the sessions you pick, a few megabytes each.

What comes through

  • GPS speed, position and the driven line
  • Lateral and longitudinal G, plus the gyro channels
  • Lap times as the Catalyst recorded them
  • Track, car and session date

The Catalyst does not connect to the car, so there is no throttle, brake, RPM or steering. Video is stored separately and is not part of this export. To line up your footage, add the video file in LapLift after the session is uploaded.

Questions

Does the export delete anything from the Catalyst?

No. It writes a copy to the SD card. Your sessions stay on the device.

LapLift says part of the export is missing. What happened?

One of the SupportLogs pieces was not selected. Pick all of them in one go: .aa, .ab and any others in the folder. A session whose laps sit in a missing piece cannot be read until that piece is included.

Some sessions are not in the list.

Sessions the Catalyst has no lap data for are hidden. That is usually a session that was started and stopped without a full lap.

Do I need to decrypt or unzip the files first?

No. Give LapLift the SupportLogs files exactly as they came off the card.

Does it work on a phone?

Use a computer for now. The export is large and we have only tested the import in desktop browsers.

Keep reading

How to read a speed trace →What is vMin (minimum corner speed)? →GoPro telemetry sync →

Free, in your browser. Nothing to install.

Create your free account